Z-30C Dimensions
Below are the measurements and an overview of the Z-30C, helping you understand its size, weight, tooth profile and cutting performance.
Z-30C / 6.0"
| Detail | Spec | Type |
|---|---|---|
| Overall length | 15.2 cm / 6.0" | Medium |
| Weight | 65 g / 2.3 oz | Heavy |
| Blade length | 6.5 cm / 2.6" | Medium |
| Blade width | 1.5 cm / 0.59" | Wide |
| Tip width | 0.9 cm / 0.35" | Wide |
The 6.0" Z-30C is a thinning and blending scissor designed for soft, controlled weight removal and seamless finishing. Its wide blade and heavier feel provide stability through the cut, while the 30 fine curved teeth and 15-20% removal percentage allow shape to be built gradually, lines to be softened and heavier areas to be blended without leaving a harsh finish.
The finger and thumb holes are designed to fit all finger sizes. Finger inserts are included with every scissor for a more secure, personalised fit.
How we measure
-
Overall length: Measured from the blade tip to the furthest point of the handle, excluding the finger rest.
-
Blade length: Measured from the tip to where the blade shape ends, rather than to the centre of the pivot.
-
Blade width: Measured at the widest point of the blade.
-
Tip width: Measured close to the end of the blade.
-
Weight: Measured for the complete scissor.
-
Please note: Slight variations may occur between individual scissors.